TROLLEYS WITH 5 WHEELS Art. Nr. Description 14090630 Trolley for 10l cylinder - static 14090636 Trolley for 10l cylinder - antistatic TROLLEYS WITHOUT BELT Art. Nr. Description 325396136P Trolley for 10 or 20l cylinder 325396137 Trolley for 10, 20l cylinders, 3×10l or 2×20l (Dimensions H×W×D: 935×426×352 mm) 500009601 Trolley for 2,5 and 5l cylinder AC

The humidifier for oxygen therapy is a device allowing an increase in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically tolerated.The jar is made of polycarbonate, or polysulphone the cap with inlet adaptor of polypropylene and inlet connection of polypropylene + coated brass. Art. Nr. Description Inlet connection K294402 MEDIWET 13

Whole medical range is available on gcehealthcare.com Mediflow® II 50 lpm is a flow selector intended for use for resuscitation and for CPAP. Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas Lateral and frontal reading of flow setting Enables to get up to 50 lpm for supplying machines (not for use

Based on the proven heat transfer design of the XHR-300, the XHR-301 allows greater outlet pressures to 150 barvia its piston sensed element. FEATURES ATEX certified to EEx d IIC T3 Dual, independent, 100 W heaters for pre heat and re-heat of sample gas 316SS Piston sensed element for low torque adjustment and high pressure control Large surface area for heat transfer Easy to wire circuit board with 115 V or 230 V supply Stylish Junction

An economical heated regulator available in ‘side entry’ or ‘in-line’ heat transfer options to maintain sample gases in their vapour state. The ‘in-line’ design maximizes the heat transfer area via a unique spiral machined heater sheath, which mixes the gas and ensures efficient heat transfer. The ‘side entry’ design can be used in applications where heat transfer is less critical, and where install

The MINI-300 provides an economical, lightweight, and versatile regulator range, designed for customers who want accurate control from a compact unit.The standard units utilise two piston sensing options to allow pressure control from 5 psi to 1000 psi (and a modified version up to 3000 psi). SPECIAL FEATURES 38 mm diameter body provides small foot space Fully supported ‘sensitive’ pistons with low pressure and high pressure outl

The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ½” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torque a

Certified to ATEX directive 94/9/EC, the XHR-300 helps to maintain saturated gases in their vapourised state due to its unique DUAL heating design. Two 100 W heater cartridges, or steam tubes, are inserted in spiral machined sheaths, which agitate the media to help with the heat transfer and analysis process. The propriety PCB is easy to wire and incorporates an adjustable potentiometer to adjust the temperature setting to the heaters. FEATURES

Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690 bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The seating area can easily be accessed from the base of the regulator for speedy servicing in situ.

A compact and economical high pressure regulator with precision machined sensing elements to allow fine pressure control on pressures up to 414 bar, which can be supplied as none venting or self venting (none adjustable). FEATURES 550 bar / 8000 psi inlet pressure Economical Design Precision machined sensing elements Load bearings and large handwheel for low torque adjustment Excellent sensitivity Self venting and non venting options