Группа компаний GCE Group объявляет о ребрендинге УЗНАЙТЕ БОЛЬШЕ close
Введение » Поиск товара
SAM® SFC-1580/1680F SERIES

SFC-1580/1680 series is the high temperature version of compact digital Mass Flow Controllers. A separate control unit with heat proofed connection, a lower sensor heating temperature, and high temperature piezo-stack are used. A simple valve structure, which does not compress and expand gas, prevents re-condensation. FEATURES Higher operating temperature 150 °C Built-in structure to prevent recondensation Fast response < 1 sec flow

TS-300 SERIES - TWO STAGE PRESSURE REDUCING REGULATOR

The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option

LF-230 SERIES - LOW FLOW PRESSURE REGULATOR

FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)

SILVER 34% CADMIUM FREE

Alloy with high silver content (34%) for joining steel/brass/copper pieces. Suitable for delicate assemblies with tight and middle clearances. Good joint filling capacity. Brazing generally at low temperatures. CAPILLARY-ACTION BRAZING: Copper-silver-zinc alloy with low melting point for brazing copper and copper alloys, steels and stainless steels. Available in bare or flux coated rods. Extremely flexible coating (it does not crumble when b

MEDICAL SHUT-OFF VALVES

To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.B

SILVER 55% CADMIUM FREE

Alloy with high silver content (55%) for joining steel/brass/copper pieces. Especially suitable for medical gases, purified gases and in the food industry. Alloy for universal use. Brazing, generally at low temperatures, of copper, copper alloys and all kinds of steel, including stainless. Its excellent fluidity makes it suitable in closely fitting joints as it can penetrate very tight gaps. HVAC, automotive, food and sanitary, electric industry,

LOW PRESSURE HOSES - MEDICONNECT

Whole medical range is available on gcehealthcare.com MediConnect is a new generation of flexible hoses for gas supply, intended for use with respiratory, anaesthetic and emergency equipment. Resistant to abrasion and change of colour Latex and phthalate free Containing antistatic inner layer Colour coding of ISO 5359 (obtionally neutral coding) Wide range of country specific connections Lengths of hoses from 0,5 to 5 m; to be specifie

HIGH PRESSURE HOSES

Whole medical range is available on gcehealthcare.com Medical high pressure hoses are used to connect cylinders or cylinder bundles to gas supply systems. The high pressure hose is intended to be used with a pressure up to maximum 230 bar. Pressure tested at 345 bar. The hose is equipped with a safety wire. HANDLING The high pressure hose shall be transported, stored, installed and maintained according to Instruction of Use. Maximum life time

LOW PRESSURE HOSES FOR MEDICAL GASES

Whole medical range is available on gcehealthcare.com The dimensions and colours of our polyvinyl chloride manufactured, textile-reinforced hoses are in accordance with the current hospital standard Maximum working pressure 14 bar The hoses for medical breathing oxygen and nitrous oxide are marked with the chemical denomination of the gas The medical breathing air hose is marked "Air" Warranty time 2 years Hose system brochure EN

GAS MANIFOLD SIMPLEX MMR

Whole medical range is available on gcehealthcare.com The Simplex MMR gas manifold is suitable for such health care where the capacity requirement is limited, such as laboratories and small health care clinics, veterinary etc. This gas manifold consists of only one group of cylinders. The regulator is mounted in the collection unit. Each inlet connection has a filter, a non-return valve and a shut-off valve. This arrangement makes it possilble